SVG to STL Converter
Turn a flat SVG into a solid you can 3D print. It runs in your browser, with no signup.
Drop an SVG here
Paste works too, and so does . SVG up to 20 MiB.
Preflight
Runs when you add a file
Not checked yet: Page size
The page size the file states or implies, which sets the scale.
Not checked yet: Open paths
Outlines that do not close.
Not checked yet: Duplicate lines
Lines drawn twice in the same place.
Not checked yet: Text
Text that is still text and not shapes.
Not checked yet: Strokes and fills
Which shapes are drawn as lines and which as filled areas.
Not checked yet: Nodes
How many points the outlines have.
Next step
SVG up to 20 MiB. Up to 200 files or 500 MiB at once. A job stops after 60 seconds.
How to convert SVG to STL
Add your SVG. Press Choose file or drop one or more SVG files on the mat. To see how it works first, press Try a sample for a key tag with a hole and a letter F in a second colour. Switch on Height by colour to raise the letter above the tag, or Mirror to move the hole to the other side.
Set the size. Type the Thickness and the Width, and pick the Units you think in. The 3D preview and the size readout change as you type, so you can check the model before you save it.
Download the STL. Press Download STL. Several files come as one ZIP with one STL for each SVG, named after it. Open the file in your slicer and print it.
What the options do
- Thickness
- How tall the shapes stand, from the print bed to the top of the model.
- Width
- The size from left to right. The other side follows, so your drawing keeps its proportions.
- Units
- Shows every size in millimetres, centimetres or inches. The STL itself is always written in millimetres.
- Height by colour
- Gives each colour its own height. The darkest stands tallest and lighter colours step down.
- Base plate
- Adds a flat rectangle under the whole drawing, so separate letters or shapes print as one piece.
- Mirror
- Flips the model left to right, which is what a stamp or a mould needs.
- Curve quality
- How closely curves are followed. Higher means rounder curves and a larger file.
- Binary STL
- Writes the compact binary form of STL. Switch it off only if a program asks for text STL.
Questions
Why is part of my design missing from the STL?
Only shapes that are filled or stroked become solid. Text that is still live text needs its font, so it is left out; the Preflight report lists it, and converting the text to paths in your drawing program fixes it. Shapes with neither fill nor stroke paint nothing on screen, so they add nothing to the model either.
How do I set the real size of the printed model?
With Width on "From the file", the model takes the physical size written in the SVG, such as width="100mm". If the SVG states no size, it becomes 100 mm wide. Type a width to override it; the size readout under the preview shows all three sides before you download.
What happens to strokes, colours and holes?
Strokes are outlined at the width they are drawn with and become solid too. Every colour is part of one solid at one height, unless you switch on Height by colour. Holes follow the fill rule of the SVG, so the inside of a ring or of the letter O stays open.
Will the STL open in my slicer?
The file is in millimetres, the unit slicers expect. In our tests every model is closed with no gaps, its triangles face outwards and its volume is positive. Our test files, this sample among them, opened in PrusaSlicer 2.9.7 without any repair; we have not tested other slicers.
Is my SVG uploaded to a server?
No. The conversion runs inside your browser, and the file never leaves your device.
Can I go from SVG to 3D model with more than one height?
Yes, by colour. Height by colour gives each colour of the drawing its own height, and Base plate joins everything on one plate. Rounded or sculpted surfaces cannot come from a flat drawing; every shape is extruded straight up.
Related tools
Limits
| SVG file | 20 MiB. A larger file is not converted and you are told why. |
|---|---|
| Several files | 200 files or 500 MiB at once. Files beyond that are listed as skipped. |
| Time | A single job is stopped after 60 seconds. |
| Browser | Needs Web Workers. Current Chrome, Edge, Firefox and Safari have them. |